Like to share my remote control of Atem Television Studio.
Now in Englisch, for all the international connections.
Here an example for direct connection, for the most simple use. But when using a wifi router, you can use UTP cable for the iPad, (more stable), but use the laptop with the software for the titles and more....
Also, Strata has a Strata view, for phone. When connected to the wifi network it will show if a cam is in preview mode (green) or actual mode (red).
So I can use three ways now.
- Direct control, not possible to use Strate view of titles by the Atem Software
- Via wifi router, we can switch at the iPad and see on the mobile phones(Staat view). Not possible to use the software of Atem.
- Hook up a laptop at the router, to use also all features of the Atem Software.
Some thoughts.
First the iPad need not to be in wireless mode, to achieve a lan connection. Just disable the wifi, establish the LAN connection, plug into ethernet, then enable the wifi, it should work.
IPAD (or other device)
Then networks setting of the iPad (or other) need to be as described in the Atem manual, it is a manual setup.
IP-Adress: 192.168.10.10
Subnet mask: 255.255.255.0
And the app (Strata of Touch Director) has to set to the IP of the mixer.
IP-Adress: 192.168.10.240
Subnet mask: 255.255.255.0
All mobile devices, with Strata view, need to be (by wifi) in the same network, and the Strata View need same IP as the mixer.
Equipment:
- Ipad with "Strata Lite" or "Touch Director"
- Dual lightning connection
- Lightning to Ethernet
- Power supply iPad
For wifi connection
- Wifi router
- And a Mac for the Atem software.
